Seamless Straight Tube (BA Tube)

 

Material: 304/304L, 316/316L, 321, 347, 309S, 310S, 31803, 32750, 904L, 600, 601, 625, 690, 718, 800, 825, 400, 500, C276, C22, B, B2, etc.
Tube delivery condition: bright annealing (BA)
Tube type: seamless, no welds of any kind
Standard: ASTM A269, A213, EN10216-5, DIN 17458, ISO 1127, NACE MR0175, ASTM B163, B165, etc.
O.D. from 6 to 25.4mm
W.T. from 0.71 to 2.11mm

Chemical composition:
in accordance with DIN EN 10216-5 respectively ASTM A269

Mechanical and technical properties:
in accordance to DIN EN 10216-5 respectively ASTM A269
Soft annealed max. Hardness 150 HV10 Tolerance +10 points

Model type and surface integrity:
in accordance with 10216-5, ASTM 269
Surface roughness Ra < 5 μm

Cleanliness of the tubes:
bore cleanliness in accordance to DIN 8905. The coils shall be dry, clean and free from swarf, drawn and roller marks.

Pressure Test:
100% tested at the appropriate pressure stated under water/air.

Tolerance:

D4/T4, max +/- 0.05mm
PMI TEST 100% GOOD
ELONGATION IN 50MM LONGITUDINAL
HEAT TREATMENT 1050℃ FOR 5MIN (W.Q.)
MEASUREMENTS & SURFACE: GOOD
IC ASTM A-262 PRACTICE E.NACE MR0175-MR0103
FLARING TESTING AS ASS. TO ASTM A1016
FLATTENING TESTING IS ACC. TO ASTM A1016
100% EDDY CURRENT TEST AS PER ASTM E426
100% HYDROSTATIC TEST AS PER A1016/A1016M
MARKING (3 TIMES EACH TUBE). SAMPLE: JW STEEL, TP316/316L, seamless, Bright Annealed, ASTM A269, OD3/8'' X WT0.035'' HEAT NO.160326T02
MATERIAL ACC TO ASME SECTION II PART A 2010 EDIT
CERT TO EN 10204 3.1 IN ACCORDANCE WITH PED ANNEX 1.PARAGRAPH 4.3

 

Package:
STRONG WOODEN BOX, INSIDE HAVE PLASTIC BAG.
The ends of the tube shall be sealed with end-caps.